ACTUATORS
High Power Actuators ; With Output Arm
STANDARD ; 40 ohm - 180 ohm.
6.5mm. Dia. x 6mm. / 600mg to 750mg.

4Gm force @ 3.5mm. Throw
( 160 Ohm @ 3.7V)

6Gm force @ 3.5mm. Throw
(60 Ohm @ 3.7V)

with 5" Litz wire leads
                                    $65.00  
MINI  ;      40 ohm. - 180 ohm.
5mm. Dia. x5mm. / 400mg. to 500mg.

3 gm.  Force @ 3 mm. Throw
(160 Ohm @ 3.7V)

4.5 gm. Force @ 3 mm. Throw
(60 Ohm @ 3.7V)

with 5" Litz wire leads
                                   $75.00
MICRO ;     40 ohm - 180 ohm.
4mm. Dia. x 4mm. / 150mg. to  250mg.

2 gm. Force @ 2 mm. Throw
( 160 ohm @ 3.7V )

3.25 gm. Force @ 2 mm. Throw
(40 ohm @ 3.7V )

with 5" Litz wire leads
                                   $85.00
Actuators ;   In Hinge Type
MICRO;  55 ohm - 120 Ohm.

Coil    4 - 4.5mm. Dia. x 2mm.
Mag. (2) 3mm. Dia. x 1mm.
with wire Tab  
                       120mg. to 200mg.

With Litz Wire strain relief leads  5"
                                     $45.00
SUB  MICRO; 55 - 120 Ohm

Coil    3 - 3.5mm. Dia. x 2mm.
Mag. (2)  2mm. Dia. x .5mm.
with wire Tab
                           75mg. to 100mg.

With Litz Wire strain relief leads 5"  

                                     $55.00
NANO;  55 - 120 Ohm

Coil   2 - 2.5mm. Dia. x 1.5mm.
Mag.  1mm. Dia. x .5mm.
with Wire Tab   
                        25mg. to 50mg.

With Litz Wire strain relief leads 5"

                                     $65.00
Home
A. ARM STAND.
A. ARM  M I N I
A. ARM  MICRO
A. HINGE   4.5
A. HINGE   3.5
A. HINGE   2.5
Transmitters
Receivers  27 / 72 Mhz.
Lipoly Battery Chargers
Timers
Lipoly Batteries
Switches & Plugs
Actuators
Complete  Motor Drive Systems
Micro Brushless Motors
Servos
Brushless Speed Controllers
Propellers
Miscellaneous Items
Receivers  900  Mhz.
Receivers  2.4  Ghz.
Wheels
Can be Made as
 Dual  Coil
With 3 Wires
as Center Tap
Add $10.00
Can be Made as
 Dual  Coil
With 3 Wires
as Center Tap
Add $10.00
Can be Made as
 Dual  Coil
With 3 Wires
as Center Tap
Add $10.00
Direct Drive Motors
Micro Controller For ( 2 ) Actuators ,  from a Servo Receiver
Control ( 2 )   20 - 100 Ohm Actuators

Size  10mm x 6mm x 2mm
Max. Current  .5 Amp
Connect to any ( 2 ) Servo Outputs on a Servo Receiver
and get ( 2 ) Amplifided Actuator Outputs

Weight   Only 85 mg. Less Wires  

                            Board Only                     $15.00    A. C.for 2
                            
Board w/ 2" Wires         $25.00    A. C.for 2/w
A. C.for 2
MICRO ACTUATOR  CONTROLLER
       For Servo Receivers
STANDARD;  30 - 40 Ohm.

Coil    6.5mm. Dia. x 3.25mm.
Mag.  (2) 3mm. Dia. x 1mm.
with Fiberglass Tab

                     425mg. to 455mg.

With Litz Wire strain relief leads  10"
                                          $25.00
MINI ;   60 -  80 Ohm

Coil    5.5mm. Dia. x 2.75mm.
Mag. (2)- 3mm. Dia. x .5mm.
Mag. (2)- 2mm. Dia. x .5mm.
with Fiberglass Tab
                       250mg. to 275mg.

With Litz Wire strain relief leads 10"  
                                     $25.00
A. HINGE   6.5
A. HINGE  5.5
MAX;   45 - 60 Ohm.

Coil    8.8mm. Dia. x 3.5mm.
Mag.  (2) 5mm. Dia. x 1mm.
with fiberglass Tab

                  720mg. to 750mg.

With Litz Wire strain relief leads  10"
                                      $25.00
A. HINGE   8.8
Micro Controller For ( 1 ) Actuator,  from a Servo Receiver
Control ( 1 )   20 - 100 Ohm Actuator

Size  6mm x 4mm x 2mm
Max. Current  .5 Amp
Connect to any Servo Output on a Servo Receiver
and get ( 1 ) Amplifided Actuator Output

Weight    Only 70 mg.
 Less Wires


                             
Board Only                     $10.00    A. C.for 1
                             
Board w/ 2" Wires         $20.00    A. C. for 1/w
A. C.for 2/w
A. C.for 2
A. C.for 2/w